• Model HD coaxial tester SS-MT8005
• Video Test
• Signal mode NTSC/PAL (Auto adapt)
• Display 3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
• LCD adjustment Brightness, Contrast, Saturation adjustable
• Video IN/OUT 1 channel BNC Input & 1 channel Output
• Video Output Mode 1.0 Vp-p
• Video Level test
• Level test Video signals measured in IRE or mV (not for TVI,CVI ,AHD)
• Video Level meter PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
• PTZ controller
• Communication Support RS485
• PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
• Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps< /span>
• Video signal generation
• Color bar generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
• UTP cable tester
• UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box.
• DC12V 1A power output
• DC12V power output Output DC12V1A power for camera
• Audio input test
• Audio input test test the pickup and other audio equipments on the front-end
• RS485 data analysis
• Data Monitor Captures and analyzes the command data from controlling device
• CVI test (support)
• CVI video signal test 1 channel CVI in(BNC interface)support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
• TVI test (support)
• TVI video signal test 1 channel TVI in(BNC interface) support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
• AHD test(support)
• AHD video signal test 1 channel AHD in (BNC interface)support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable
• AC/DC Voltage 0-660V auto/manual range, the min resolution is 0.1mV
• AC/DC current 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
• Resistance 660.0O, 6.600kO, 66.00kO, 660.0kO, 6.600MO, 66.00MO
• Capacitance 6.6nf~66000uF, the min resolution is 1pf
• Diode 0~2V forward voltage, the min resolution is 1mV
• Data hold Hold and display the measured value
• Relative measurement Display the relative power value
• Continuity testing Built-in buzzer will sound, if resistance is lower than 50 O
• Testing speed 3 times/ seconds
• Data range -6600~+6600
• Calibrated Wavelength(nm) 850/1300/1310/1490/1550/1625nm
• Power range(dBm) -70~+10dBm
• Sensitivity(nW) 0.001nW
• Connector type FC/PC
• Data hold Hold and display the measured value
• Relative measurement Display the relative power value
• Visual fault locator Test fiber’s bending and breakage ( SM and MM fiber)
• TDR Tester breakpoint and short circuit measurement(BNC cable, telephone cable)
• Power
• Power Adapter DC 5V(1.5A)
• Battery Built-in 3.7V Lithium polymer battery ,3000mAh
• Rechargeable After charging 3-4 hour, working time lasts 11 hours
• Low Consumption Energy saving technology, the battery icon real-time display
• Parameter
• Operation setting English/Chinese and other languages OSD menu
• Auto off 5-60 (mins)
• KeytoneOn/OffGeneral
• Working Temperature -10ºC ~+50ºC
• Working Humidity 30%~ 90%
• Dimension/Weight 194mm x 112mm x 48mm / 540g

¡Escribe tu comentario!